|
Pi-Alkaline
The Pi-Alkaline Water Filter combines specially
positioned ceramic magnets, magnetite as well as 5 other volcanic minerals and
ceramics to produce structured water to stabilize pH, improve circulation, increase mental
alertness and strengthen the immune system.
HOW IT WORKS
Pi water is very similar to bodily liquid, characteristic wise, and is created
by adding Ferric Ferrous Salt (Fe2Fe3) to water through ceramics. When Fe2Fe3 is
added to ordinary tap water, it emits high frequency far infrared rays. Far
Infrared rays are known for their powerful healing and detoxifying effect on
living things. Far infrared rays suppress the increase of excessive free
radicals and shorten the cluster chain of water. The purified and activated
water with smaller clusters possesses a function of protecting cells from
various stimulants.
Pi-Water is one of the best hydrating, most readily absorbed waters on Earth,
eliminating negative substances in our body, increasing immunity, and possessing
self-healing powers . Pi-Water also raises the pH levels to make the water more
alkaline creating an environment more healthy to your body.
Reverse Osmosis
Reverse Osmosis Reverse osmosis (RO) is a common treatment technology
that produces high quality water. The process works by forcing water
under great pressure against a semi-permeable membrane, where ion
exclusion occurs. With ion exclusion, water molecules form a barrier
that allows other water molecules to pass through while excluding most
contaminants.
Typical contaminant rejection rates range from 85% to 95%, and a gallon
of highly treated water can usually be produced from two to four gallons
of raw water, depending on the initial quality of the water. Maintenance
involves the replacement of the RO membrane cartridge every two or three
years, and the carbon filter cartridges six to twelve times per year.
RO is effective for the reduction of a broad range of health and
aesthetic contaminants, though it is typically not used for the
reduction of biological pathogens. RO also incorporates an activated
carbon filter, which can provide added treatment for the volatile
organic compounds (VOCs) not treated by the membrane itself. It should
be remembered that this brief description of water treatment
technologies is only intended to provide an overview of how each
technology can be applied to solve a water contamination problem.
Water Softener
Cation exchange use the chemical ion exchange process to exchange
cations on a "resin" bed for cations of the contaminant that needs to be
removed from the water. For example, in cation exchange, a cation of
hardness mineral such as calcium is exchanged for two cations of sodium,
effectively removing most of the calcium, and softening the water. The
cations on the resin are eventually exhausted, and replaced by the
cations of the contaminant being removed. When this occurs, the bed must
be backwashed using a concentrated solution of the base cation, which
recharges the bed and flushes the built-up contaminant. Cation exchange
typically uses sodium or potassium chloride, and can also treat for some
forms of lead and radium. It is also commonly used to soften water.
Carbon filtration
Activated Carbon (Granular and Solid Block) Granular activated carbon is
a well-established technology for the reduction of a wide range of
aesthetic contaminants, and is quite effective in the reduction of some
health contaminants such as volatile organic compounds (benzene,
trichloroethylene, and other "petroleum"-based contaminants. Because of
its molecular makeup, activated carbon can adsorb well, meaning that it
can take in or collect many organic molecules on its surface. Granular
activated carbon filters are typically inexpensive, and maintenance
involves replacing six to twelve cartridges a year, depending on the
quality of the raw water and the filter media. Specially designed solid
block and pre-coat activated carbon filters are also available, which
are effective at reducing heavy metals such as lead and mercury. Solid
block filters with a pore size smaller than 0.2 microns are often
effective against biological contaminants as well.
Ultra-Violet System
UV radiation can be an effective vermicide and bactericide. Disinfection
using UV radiation was more commonly used in wastewater treatment
applications but is finding increased usage in drinking water treatment.
The primary usage for a UV light is to disinfect filtered water at a
certain flow rate. Bacteria, viruses, and other microorganisms are
destroyed by the UV interfering with the DNA and RNA in the organisms'
reproductive cycles. If your water source is known to be unsafe with
microorganisms and you want to have extra protection, then you can add
an UV as an additional stage to disinfect water.
Ultraviolet water purification lamps produce UV-C or "germicidal UV,"
radiation of much greater intensity than sunlight. Almost all of a UV
lamp's output is concentrated in the 254 nanometers (nm) region in order
to take full advantage of the germicidal properties of this wavelength.
Most ultraviolet purification systems are combined with various forms of
filtration, as UV light is only capable of killing microorganisms such
as bacteria, viruses, molds, algae, yeast, and cysts like
cryptosporidium and giardia. UV light generally has no impact on
chlorine, VOCs, heavy metals, and other chemical contaminants.
Nevertheless, it is probably the most cost effective and efficient
technology available to homeowners to eliminate a wide range of
biological contaminants from their water supply. Recent testing has also
shown that UV can be effective at destroying certain VOC's, although we
would not specifically recommend the technology for VOC reduction.
UV water treatment offers many advantages over other forms of water
treatment for microbiological contaminants. Most importantly, it does not
introduce any chemicals to the water, it produces no bi-products, and it
does not alter the taste, pH, or other properties of the water.
Accordingly, in addition to producing safe drinking water, it is not
harmful to your plumbing and septic system. Further, it is easy and
cost-effective to install and maintain without any special training.
|
Pi Alkaline
Alkaline Filter
$ 699.95
Specials:
RO With Deionization
$229.95 was $ 329.95
Free Shipping and Gift
RO With Permeate Pump $289.95 was $ 389.95
Free Shipping and Gift
RO With Ultraviolet $299.95 was $ 399.95
Free Shipping and Gift
|
